EN710 Liquid Polyurethane Remover for Steel Parts

Non-Hazardous alternative to methylene chloride and other pu foam remover methods. The unique formula is suitable for use on mild steel as it will not tarnish the metal but will effectively remove cured polyurethane.

EN710 Liquid Polyurethane Remover for Steel Parts

Non-hazardous polyurethane remover for use on easily corroded metals.

Manufacturers who use polyurethane across the globe understand the importance of being able to remove excess polyurethane that has cured. This can restrict the operation of equipment and substantially reduce its operational life.

While there are many polyurethane removers on the market many of them require great caution. Traditional solvent based cleaners such as Dichloromethane are highly corrosive and can not be used to clean Iron, low grade stainless steel, copper, aluminium, titanium and most alloys. Machinery with components that are susceptible to corrosion should only be cleaned with a specialist PU foam remover such as EN710 anti-rust polyurethane remover liquid.

EN710 anti-rust PU foam remover is a formula to be absorbed by cured polyurethane. It acts to soften the residue by breaking down its structure, allowing easy removal. Designed to be effective on PU but not tarnish corrosion susceptible metals like Iron and aluminium and titanium.

EN710 is not only safe for equipment. It is also offers very low health & safety and environmental hazards. This reduces the risks for storing, using and even disposing of the product.

After cleaning fish out any large bits/residues of PU as this will extend the life and reduce cost in use for the product.

Enquire about EN710


How to use

  • 1

    Use neat and immerse parts or pour into cold mould

  • 2

    Leave for a minimum of 60 minutes preferably overnight

  • 3

    Wipe off with clean cloth, stiff brush, paint scraper or compressed air

  • 4

    Avoid extended contact with mild steel, plated metals or viton seals

  • 5

    For best results rinse/clean parts with EN730 and dry thoroughly

Why choose Bio 8 Industrial Ltd?