URI-Klearpath – Urinal Maintenance & Pipe Treatment

Uri-Klear is a professional grade, task specific descaler and blocked urinal unblocker. Ideal for waterless urinals.

Available in 1L and 5L – this powerful Uric acid descaler, quickly breaks down blockages cased by uric acid and scale which cause urinals to block, backup and overflow.

Working in Minutes it is NON Caustic and NON fuming and washrooms do not need to be closed during it’s use.

It’s unique formula (which does not use Sulfuric or Hydrochloric acid!) does not damage pipes, metals, plastics or ceramics!!

Applications for URI-Klear

Standard flushing Gate & Trough Urinals – these have water flushing either on a timed or activity based timer.

Waterless or waterfree cartridge Urinals – common makes are called Falcon Aridan, Ideal Standard Aquanil, Sloan, Bobrick, Hybrid H²O, eZ-Trap, amongst others.

Reduced flushing bacterial based Urinal sleeves – PHS Ecoshield, Eco-Clear, Whiffaway, etc.

How does URI-Klear work?

URI-Klear quickly dissolves hard deposits in gents urinal waste Traps whether they be Bottle or P-Traps, and also deeper down the pipework whether that is copper or plastic. However it is NON-Caustic so it only dissolves the Uric acid and Scale.

How to use with Standard Flushing Grate or Trough Urinals

IMPORTANT – Always read and follow instructions for best results.

1. Isolate/Turn off water supply temporarily if possible.
2. Remove as much debris/urine/water from waste trap and pipes as possible (will work in pipes/traps full of urine but you do need to ensure there is enough capacity to add the product and will take longer for product to work).
3. Apply product directly to area that the blockage is located.
4. Wait 10 minutes then reconnect water/flush water down to ensure blockage removed.
5. Blockages deep in the pipework system may need more product or a 2nd application if there is a high presence of water/urine left in pipe before application.

How to use with Waterless & Waterfree Cartridge Urinals

1. Remove cartridge to expose drain (do not apply URI-Klear via the cartridge, it needs to bypass the cartridge and go directly into pipework).
2. Wait 10 minutes then flush water down to ensure blockage removed.
3. Blockages deep in the pipework system may need more product or a 2nd application.

How to use on Reduced Flushing Bacterial Based Urinal Sleeves

1. Isolate/Turn off water supply temporarily if possible and remove sleeve/dome from urinal grate.
2. Remove as much debris/urine/water from waste trap and pipes as possible (will work in pipes/traps full of urine but you do need to ensure there is enough capacity to add the product and will take longer for product to work).
3. Apply product directly to area that the blockage is located.
4. Wait 10 minutes then reconnect water/flush water down to ensure blockage removed.
5. Blockages deep in the pipework system may need more product or a 2nd application.