Author name: admin

In the UK, the demand for property builds has never been higher. As a result of the current housing crisis, all of the main political parties in the UK stated (in their 2019 election manifestos) a commitment to increasing the country’s housing supply. As a result, there is an extremely pressing need for sites that […]

When it occurs, graffiti is extremely frustrating and, without the right methods, notoriously difficult to remove. When you’re working to remove graffiti from a surface, it’s important that you not only use the most effective chemicals, but also use the right cleaning methods for the specific task (and surface) at hand. So, with this in

Warehouse floors are usually a very sooth surface to allow good surface friction for Forklift trucks and other mechanical equipment for safety. The can be bare concrete which can be quite dusty or they can be sealed with either a permanent or sacrificial seal to reduce dust and porosity of the concrete. The friction created

There appears to be an increase in plastic surfaces being damaged by paints and inks that has occurred over the past 10 years. The reasons are difficult to identify as in the past the main dangers to plastic were either from the Graffiti Removers used to remove the paint and ink, or the Graffiti Artist

Low pressure dispensers of Polyurethane are a very popular machine within the Polyurethane industry, with Manufacturers such as Autorim, Hennecke, Graco, OMS, ISC, Polytec EMC, Covestro to name a few quality manufacturers. They work by the combining of Isocyanate and Polyol within a mixing chamber to create a chemical reaction which is dispensed in a

Polyurethane and Elastomers can be in the form of a rigid or flexible foam to a very solid and hard-wearing block. They are naturally very inert and resistant to many cleaning chemicals when they have cured. So how do you clean cured polyurethane or remove cured polyurethane and elastomers from machinery or moulds? The first

The tyre marks found on warehouse floors are very difficult to remove and over time can build to create a significant skid risk if the floor is wet and obscure vital safety lines and pedestrian demarcation zones. Warehouses will predominantly suffer from loose debris such as bits of wood from damaged pallets, cardboard, plastic pallet

Many warehouse floors are very smooth as they will see lots of traffic from Forklift Trucks, Tugs and tractors, which have little or no suspension, so a flat floor is vital to keep the loads stable and safe. This equipment is normally heavily loaded and highly manoeuvrable in terms of being able to turn and

Plastic surfaces and advertising hoardings are an attractive target for graffiti as they are normally smooth and very receptive to paints, inks and other materials such as shoe polish and lipstick. The inks and paints bond strongly with the surface and provide the ‘artist’ with an ideal canvas to show off their work, however it